3572 comments found.
Hi 
I have chosen header type 2, but I don’t want the logo to bounce/jump down in the sticker menu.
I only want the menu to show in the sticky menu, how do I do that?
Thank you very much 
Hi there,
If you’ve set the exact width and the logo doesn’t change much in dimensions then you won’t have a problem, but you will always use another logo in the sticky menu because you can’t have the original one in two places.
P.S: I saw that you have created some other tickets, can you please try to add all your questions in one thread, because in this way is easy for us to understand what you have done and what is left, also is would be easy for you to post in one thread 
Kind Regards,
Art
1. What are the exact dimensions for the logo? 2. And should i upload logo to both ‘costume logo’ and Transparent Header Logo? Or is it ok only to upload to ‘costume logo’?
3. If I only want the menu to show in the sticky menu (without the logo), how do I do that?
Ohhh. of course, I’ll remember that – I’ll just choose one to stick with
I’ll just paste in some of the other question That still are open, ok.
Another earlier question from me:
I’m getting frustrated 
When I imported the demo setting etc. I thought I could edit or do some modification on the pages in visual composer?
But when I wanna edit a page, the visual composer say: Welcome to Blank Page, You Have No Content Yet! Add Some Content or Use Predefined Layouts…
The majority of the page are like that??
Thank you!
Your reply:Hi there,
It seems strange, when you install the demo content it will install all the pages and settings just as the demo page.
Can you please send us your WP credentials on email? We need to investigate your problem and then get back to you with possible solution.
To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
P.S: Please note that we usually do not respond to emails that request support, because here is our primary support forum. We use contact form just for sending sensitive information. Also emails response time can be up to 7 business days.
Kind Regards, Art
My new reply is:
What if I uninstalled the theme and the child theme and installed it again?
If you think so, please tell me if: It’s correct that I first need to install the Aurum them and after that the child theme?
Frome which source is it best to install the Demo content: 1. upload the zip file I downloaded or 2. from the backend of WP under the menu Laborator?
WMPL 3. I would like to use WPML one the site as well, should I buy it first? And then install it as a usual plugin or would you recommend me to go to the backend of WP under the menu Laborator and install it there?
Could you be so kind to tell me in which order I should install the different theme, child theme, demo and WMPL – And from where you recommend me to do it?
Thank you VERY much, you are really helpfull 
1. There isn’t any exact size for the logo, you can use any size but make sure you use the size twice bigger because it is better for retina devices to be high quality.
2. If you use the transparent header then you can upload it there too but if you don’t there is no need to.
3. We can hide it somehow, just provide us a link to your site.
Hi there,
You can try uninstalling the theme and installing it from the beginning, first install the theme and then the child theme.
The best and easiest way to install the demo content is from the WP admin panel, but sometimes it doesn’t work so you have to do it manually.
If you want to translate the site then this is the best plugin for translation, our theme supports the plugin and it is a premium plugin yes, you need to purchase it first if you want to use it.
Kind Regards,
Art
Great! Thank you 
I will try that – I only have 1 question left according the demo content in the WP admin panel: I would normal install the Aurum demo content, but should I instead install the demo where it says WPML? I suppose it’s still the Aurum theme? And if it´s a yes to install the WPML demo instead, is it okay to do it before I buy the plugin?
Once again thank you very much for your patience – Youa are fantastic 
Sorry, I’m behind my schedule – what do you say to the above? 
Another thing, I would to skip the shop menu in the main menu and instead have the top categories there instead:
Toys menu with a mega menu to lower categories like : Wooden toys etc.
Decor menu with a mega menu to lower categories like : Dresser etc.
Bath menu with a mega menu to lower categories like : Shampoo etc.
It should be something similar like that: http://www.ralphlauren.com/shop/index.jsp?categoryId=1760783I can’t figur out how to do it and I also don’t seem to be able to find the demo content to eg. 404, about us etc.
Again thank you very much 
Please close this thread and disregard the email I mail your support – I’ve got the answers
Thank you!
Okay, I have 2 new questions – Sorry 
I’m learning a lot, but all the themes are different 
1. I would like to change my main menu in the fashion theme.
Instead of the current link: Home | Shop | Pages | Blog | etc. I would like the categories in the main menu: Toys | Kids in Bath | Bedroom
BUT I would like the url-structure to be like the shop: www.mysite.dk/kids
and not like: www.mysite.dk//produkt-kategori/kids/
I would like the main menu like: Jewelry, but with a ‘home’ button with a home icon. And the categori pages should be with left sidebar.
Can you help me? It would mean a lot!
2. Am I not supose to be able to make som changes with the visual Composer to the contact page? It says: ‘Welcome to Blank Page, You Have No Content Yet! Add Some Content or Use Predefined Layouts…’
I would like to be able change the setup and to put in a textbox, for me to write some further information above the form.
Well, I think that is it 
I really do appreciate you help, thank you!
Hi there,
1— I’m afraid that this is not possible.
If you want to add home button with icon, just go to Appearance > Menus.
You can see how we added heart icon there
(view large version)
You can find entypo icons on link
2— That is not possible, you can use this plugin Contact Form 7 if you want to modify your contact page.
Kind Regards,
—Ylli
Did I understand it correct? I’m not able to have my categories in the main menu, like in the theme: Jewelry?
Without the product-category in the link (www.mysite.dk//produkt-categori/kids/) For SEO reasons, I would like the link structure to be like this: www.mysite.dk/kids.
Are you sure?
Another question:
I have some double Woocommerce site: Cart, Check out, Shop, My acount, 1 in my language and 1 in english.
Since I would like to have Multi-language, that might be okay.
BUT the are not identical: Shop: the whole shop layout only seems to be on the English page, with products and sidebar etc. – The Danish Shop page is empty?
Cart: The layout is different, the Danish layout is full width and the English page is not.
Check out: The Danish check out page looke like the cart page: CART EMPTY – and the English page is empty.
My account: The look identical.
What should I do? It’s quite confusing 
I suppose that both pages should be identical?
How should I handle it regarding my plans to install WPML..
I’m really looking forward to hear from you since I’m still under a deadline – thank you so much for your patience 
About the link structure, again(sorry!)
What should I do to get a clean link structure like this: www. mysite.com/shop/toys/wood-toys
I’m sorry you have to read further up.. see my 2 previous comments, from where it starts with: “Okay, I have 2 new questions – Sorry ;)” – Thanks 
Hi there,
I have read the questions and we have replied to them one by one, what is the issue you’re having now cause as I see we have replied to all your problems, regarding the link display you will have to edit the permalinks and it is more a WordPress related issue which doesn’t have to do much with the theme.
Kind Regards,
Art
Sorry – I collect my questions:
1. Are you sure that I’m not able to have my categories(link) in the main menu (instead of using the shop-link) without having a url-structure like that:
www.mysite.dk//produkt-kategori/kids/
It should look like this:
www.mysite.dk/kids/
Especiely since the ‘kids´ menu-link is the produktkategori!?
2. I have some double Woocommerce site: Cart, Check out, Shop, My acount, in (Danish)my language and in english.
Should I keep the English page? How should I handle it regarding my plans to install WPML..
3.
About WPML, I haven’t tried it before
Should I just install the plugin as usual and follow the guidelines or should I install the ‘content pack’ from ‘Demo Content install’ in the backend of the admin panel?
Any goog advice for me to get a good kick of with the WPML? 
4. There is some text that’s not translated on the: Cart Empty page Cart page Check out page etc
Can I edit the text to danish? And where do I do that?
5. We choose header 4 with the logo centered above the main menu and therefore, lost the cart.
We put the cart link in the submenu(upper right corner) instead, that works fine 
But we still would like to see how many items are in the cart(the round cirkel) and when hover over the cart-link the information about whats put in the cart and subtotal will appear etc.
That’s it, after solving the above I’m pretty much done 
Again thank you very much for you kindness and patience 
Oops this belongs to question 5 above (read the above first!)
- Regarding cart link: We would like to replace it with the cart icon instead of a text-link.
Hi there,
1. As I said this is a WooCommerce & WordPress related issue, I cannot give you a proper answer for this, so better ask them directly in their forums.
2. If you’re using just one language then no need to keep two pages, but if you’re having more than a language then WPML will create some pages in another format which means the pages you created do not really valid.
3. You will just need to install it just like other plugins.
4. We’re having some problems with some strings not being translatable, can you help us by telling which are these words? We are currently working on the new theme update.
5. This is the layout of that kind of header, it doesn’t include the cart and the only way to have it is by adding it in the menu as you did.
Now I saw your additional comment, paste this the menu after the name:
http://pastebin.com/NPTxaVTYYou can replace the basket with bag if you need another icon.
Kind Regards,
Art
1. Ok 
2. I didn’t create the extra mentioned pages, Woocommerce must have created the danish pages when I installed your theme(asking if I want to translate in danish).
I don’t want to run into problems when I install WPML – So just to be clear: should I keep the danish pages and delete the English pages? or should I keep them both?
It seems most logical that WPML will be based on only one language?
3. Ok, thanks 
4. No, problem! I think it would be easier for me, to take some screen capture and send them to you, that way you know exactly where it needs to be translated
Do you have a email I can send it to?
5. I understand. But is there no way I can get the circle telling how many items there is in the basket? And/or when I ‘hover over’ it shows the basket items and subtotal etc.?
I tried , but it dosen’t show? I then tried with , that works fine?
Hi again,
2. You can keep them both.
4. To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
5. Unfortunately not, many users have requested this but currently it is not possible.
Kind Regards,
Art
Thank you 
I just got an email telling me, that there’s an update to the theme.
How do I update?
When I go to > Envato Toolkit > Theme > update automatically, I get a message saying: “Updating this theme will lose any customizations you have made.”
I work in the Child theme, should I just disregard the message and install the update?
I have all the time had an issue with Envato not being installed!? (The same with Visual Composer)
Hi aj-dk,
The easiest way to update our themes is if you use Envato Toolkit. On this link How to update Themes and Plugins
you can learn this easy step-by-step procedure 
The message “Updating this theme will lose any customizations you have made.” is default on that plugin, but don’t worry about that 
Then in order to update plugins don’t forget to go to Appearance > Install Plugins to update all your premium plugins to the latest version that we support. 
Kind Regards,
—Ylli
1. Wow, I thought my changes were gone until I discovered that I had to activate the child theme after installing the update.. I was scared there for a moment 
But I still have an issue with the Layerslider not updating: Installed version: 5.5.0 – Active, Requires Update – Available version: 5.6.2?
How do I get the LayerSlider updated?
2. Regarding replacing the cart text-link with a cart icon in the sub menu(upper right corner).
I tried that, but it strangely didn’t work with the cart: , but when I tried with heart and other symbols it worked?
How do I solve the issue?
Thank you for the great support 
Thanks, now it’s working 
The code is the one you gav me:
Glad to hear that 
Haha.. don’t know what happened to my sentence; I better repeat my question:
2. Regarding replacing the cart text-link with a cart icon in the Secondary Menu(upper right corner).
I tried what you suggested: .
But it strangely didn’t work with the cart, but when I tried the heart symbol and other symbols and that worked fine!?
How do I solve the issue?
I tried this one and tried others too that work!
But I would like the one with the cart.. ...and for some reason it doesn’t work in your theme??
Could it be lack of space?
Could you please help resolving the issue, thank you 
Hi 
It is the CART-icon I would like to show.
It is one the entypo icon list: http://web.archive.org/web/20140912210715/http://entypo.com/characters/
The cart icon id: U+E73D ?
Thank you 
I know that the basket icon works fine, I have already tried it!
I keep telling you, that I want the CART icon to display and it dosen’t work. I don’t want the basket!
And since the CART icon is represented on the entypo list, it should work, right!?
Can you please send us your WP credentials on email? We need to investigate your problem and then get back to you with possible solution.
To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
P.S: Please note that we usually do not respond to emails that request support, because here is our primary support forum. We use contact form just for sending sensitive information. Also emails response time can be up to 7 business days.
Kind Regards,
Art
Thanks, i will do that 
Hello,
We can see that in some product categories, there is an empty product. Can you please help us with this?
http://prntscr.com/8icntq URL: http://www.zoharatights.com/eu/en/product-category/print/ (roll down few pages)Hi harel_d
I see that you are using some ajax navigation plugin for shop, because by default Aurum will not show an empty product, this might happen because of the plugin you are using!
I have tried in my own browser (both chrome and firefox) and worked fine, without showing any empty gap!
This must be a plugin issue, so you should as the plugin developer why you get that empty product space! We are unable to give support for third-party plugins.
I want to make my header black but also the menu items, icons and search box should be white.
thanks
Man I’m on a roll today. Sorry. Hopefully this will be the last question for a while.
Testimonials. I would kill for a “Testimonials Grid” module akin to the Picture and Media grids (and masonry variants).
In the mean time, though, is there any way to display them other than the VC Slideshow module? We use them for collecting “press clippings” and it’d be nice to lay them all out at once.
I’m an idiot. Immediately after posting that I looked at the “Post Grid,” facepalmed, and went about my business. Please delete.
Hello, i want to ask if it is possible the text in the main menu and the text in the contact form to be lowercase Thanks
One other thing, this one a bit of an important Tech Support Issue —
For some reason my pages will sometimes arbitrarily change their slugs to that oe one of the products in my inventory. I’m not entirely sure what causes it and haven’t been able to replicate it on demand, but it’s happened a few times in the past so far. Have you heard of this happening to anyone? Does it sound familiar?
I managed to get it to repeat itself, but I’m not sure exactly what’s causing it. I’m right now editing my “Press” page (basic visual composer page with a Testimonials module running) and whenever I update it, the slug changes from “press” to “gist-sept-2015” the first testimonial in the database.
Not sure if that helps.
Another note: for some reason the page loads up in Classic Mode despite the fact that all my other pages load up in Backend Mode. And if I switch to Backend Mode and hit Update, when the page reloads the slug has been replaced.
I can basically replicate the issue now:
1. Edit the Page 2. Switch from Classic Mode to Backend Mode 3. Click Update
After the page reloads, it will be back to Classic Mode and now the page slug has changed to that of the first product in the database.
Hope this sheds some light on the issue.
Hi there,
Even though this is more a general WordPress issue and not a theme issue, I will try to help you, can you try by going to Settings > Permalinks and make sure you’ve set the Permalinks like in our demo site: http://drops.laborator.co/1bqlhIf you’re still having these issues then please don’t hesitate to write us an e-mail with your login credentials, we will see what we can do about it.
To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
Thanks!
Does it absolutely have to be that permalink format? We also have a number of blog posts, so removing the year/month is less than ideal. 
That’s fine. Thanks!
Hi again! Is there a way to display a product Attribute on the shop page / VC Product Carousel in addition to the Product Title?
Specifically, I’m using Aurum as a sort of “book archive” and it’d be nice to be able to include the author’s name (which is saved as attribute bk_author) in the list results. Is that possible?
Hi
This is possible but requires some custom coding to be added in functions.php so basically this code will work for you:
add_action( 'woocommerce_after_shop_loop_item_title', 'author_title_action' );
function author_title_action() {
?>
<p class="book-author-title"><?php echo get_post_meta( get_the_id(), 'author_title_meta', true ); ?></p>
<?php
}
Where author_title_meta should be the author name variable stored for books, it depends by which name you have saved the book author in post meta fields.
Hi! I added the code to my functions.php and changed author_title_meta to bk_author (the slug for the author name attribute) but it’s still not working. Did I miss something?
I did a get_post_meta( get_the_id() ); to look under the hood and the array is completely empty. Is the product id not carrying over for some reason?
function author_title_action() {
$product_ra = get_post_meta(get_the_id());
echo ("<!--");
foreach($product_ra as $term)
foreach($term as $termdetails)
echo $termdetails.("\n");
echo ("-->");
}
(pardon the sloppy code, it’s just for testing)
Hi
Thats weird, it is actually calling the product meta but not getting any values from the entry in database.
The best way to test it is to try it by myself, but I need ftp details in order to do that.
To send us email use this link. Please note that we usually do not respond to emails that request support, because here is our primary support forum. We use contact form just for sending sensitive information.
Login credentials sent. Thanks!
HI! I Instaled multisite on my domain…Layerslider workd on the main domain but on subdirectory domain it is not working. I cant import plugin, I cant add new plugin,.. What can I do?
Hello, I dont know if you can help me with this, but my friend purchased this theme with the intention to build it for me but got greedy and left me out to dry. I have no idea how to use wordpress so i cancelled it. Therefore I cannot use this theme. As much as I love it, is there anyway i can get refunded for it since i never even used it?
Hi there,
I noticed a little glitch in the cart when you enter a invalid postal code / shipping information.
All of the titles in the cart go out of place, and do not look right. Is there anyway to fix this?
Also is there a way to customize the message that displays when invalid shipping information is entered?
http://i60.tinypic.com/2mz245.pngThanks!
Hi Ylli,
Great, thanks. In the mean time, is there a way to customize the message that displays when invalid shipping information is entered?
Thanks!
Hi,
One of the main reasons i purchased this theme is because of the RTL support.
but there is no option to change the theme layout like all the other themes do!!!
How do i change the the site to right to left without manually changing it?
Hi Ramibs,
First you need to change thee language of your site, in your case to Hebrew and the theme RTL will be activated.
You can change the language by going to WP Dashboard > Settings > General > Site Language.
Result:
(view large version)
Kind Regards,
—Ylli
Thank you for the reply,
I already changed everything to Hebrew, although, i wanted the Wordpress panel to stay in english.
In addition, not all the content in the site has been translated….
Hi Ramibs,
Site will not translated, you have to do that by yourself.
To translate/rename theme strings, you can do this via Loco Translate plugin. If you don’t have this plugin, please install and activate it in your WordPress site.
1. Then go to Loco Translate > Manage Translations
2. Click “New Language” for the current active theme (if you didn’t created it yet, otherwise ignore this step). On the new language page, choose these options – click here http://d.pr/i/1ewoc
3. After that you will be redirected to the editing screen for theme translations. Before you continue make sure this is true – click here http://d.pr/i/18h0w
4. Follow these instructions to learn how to translate strings – http://d.pr/i/1jsek
5. The changes will be applied immediately – http://d.pr/i/1ju6w
Note: Translation files will be saved to wp-content/themes/{theme-name}/languages folder. Here you have the explanation – http://d.pr/i/1lBCJ
After you make your changes, always save a backup when there is new theme update. After you update the theme (languages folder will be replaced), just move the backup files you previously saved to the same languages directory and your changes will still be applied.
Kind Regards,
—Ylli
Hi are there an update comming up soon to the AURUM Theme. I have big problems with “class.options_machine.php” after last wordpress update.??
The problem is now solved. Small errors in the codes is now fixed. Thanks for an outstanding theme.
Hi,
I am totally confused with the image size that I should put in my listing page to get the best result.
Currently I am using 640×640 for all my product images.
I know the catalog thumbnail size by default is 290×370 and for single item is 555×710 but currently my image in single item is blurred now.Help
What is the best image size should I get to obtain best result here..
Sorry for the double post…another thing to ask
2. What is the best image size for the slider slide. My slider got some empty spaces when I scroll up or down.
3. How do I put my newest product in the Featured list. As seen from my website, the featured list include the Sold items which I dont want that.
4. I would like to add notification on top of my header and between my slider and menu, how do I do this? This is the reference that I found on other’s website: http://www.ontheblockshop.com/my url: vercellie.com
Thanks guys
My Url: http://vercellie.com/
Hi there,
1. Do you want to get the original images in the theme so they wont be cropped and the quality will be very high, but they will take a bit time to load.
2. There isn’t any perfect size for the slider but you will have to put your image as large as you can because the quality will be better.
3. The only way to display featured products is by choosing the items one by one with the “Build Query” option.
4. This is something the user has done manually by modifying his own theme files.
Kind Regards,
Art
Hi guys,
1. what do you mean to get the original images in the theme? I just want customers to see the whole images for my product. See sample here that it was cropped: http://vercellie.com/index.php/product/chelsea-pink/ , how do I fix this?4. Any way to teach or any Custom CSS code that you can help for the notification on top of my header and between my slider and menu like this one here http://www.ontheblockshop.com/
5. For the currency changer, do I need to buy this WPML to make it work? what else do i need to buy other than the WPML?
6. I dont have the ‘add to wishlist’ in my single product page. Any idea? and how do I add the ‘Description’, ‘Additional Information’ in the single product page as well? just want to make it like the demo here http://themes.laborator.co/aurum/multilingual/product/pocket-watch/
7. I know this is stupid, but how do I add the ‘best sellers’ list in my home page, just like the demo http://themes.laborator.co/aurum/multilingual/Thanks so much for this newbie questions.
Hi there,
1. Currently trying to fix this with the login credentials you sent me.
4. I am sorry but as I said earlier, the client has done this manually and not with our help, if we would’ve added this option to him I would add it to your site also.
5. If you also use the translation then get the WPML currency switcher, otherwise there are also free alternatives for the switcher such as the WooCommerce Currency Switcher
6. To add the wishlist option you need to add the wishlist plugin to make it work, also the Description and Additional Information will be added automatically when you add extra info to the product, such as the size and colors and also a description for it.
7. This is just a sample product carousel we have added, you can add the items manually with the Build Query option and set the title to Best Sellers.
Kind Regards,
Art
thx for the update
3. now I have big problem with the WooCommerce Currency Switcher, my base currency is SGD.
From Woocommerce Currency Switcher, I tried to have 2 free currencies SGD (base currency) and IDR but I have this message from my all product price list.
“WRONG DATA. CHECK YOUR WOOCS OPTIONS!0.00”
6. Any specific wishlist plugin that I need to install?
7. Sorry dont think I understand regarding this Build Query option. Any ideas that you can help?
Pls help..need to fix this currency urgently. Thanks.
Hi there,
3. This has to do with the plugin, please check if you’ve set it up right and if it doesn’t work contact the plugin developer to see if it is compatible with the latest versions of WooCommerce and WordPress.
6. I pasted the link above in the last question and marked it as a hyperlink, the name of the plugin is YITH Wishlist.
7. There is no option to get the best sellers, we have just put the title of the element so and the products were selected one by one manually with the Build Query Option.
Kind Regards,
Art
Hello Laborator team I have an issue when i tap the shop section i receive this message: Fatal error: __clone method called on non-object in /home/melshoes/public_html/wp-content/themes/aurum/woocommerce/content-product.php on line 22 How can i fix it? Thank you very much!
Hi Ylli i’m using 2.5 but i can’t update the envato plugin. I forgot to mention that i had install wordpress in Greek language. Is it a problem? If yes i’ll remove it and i’ll install the English version. Yours sincerely.
If i use the English version tell me how to translate/ Thank you a lot.
Can you please send us your WP credentials on email? We need to investigate your problem and then get back to you with possible solution.
To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
P.S: Please note that we usually do not respond to emails that request support, because here is our primary support forum. We use contact form just for sending sensitive information. Also emails response time can be up to 7 business days.
Kind Regards,
Art
HI,
I know this theme has a rtl support, how do i shift all my heading, products, tag lines and ect. to the right. i am using woocommerce as well and install it’s rtl plugin.
thank you.
Hi Ramibs,
I have replied to your other ticket that you have created for the same question.
http://themeforest.net/item/aurum-minimalist-shopping-theme/9600822/comments?page=76&filter=all#comment_11067633Kind Regards,
—Ylli
Hi, i have a couple of problems with my theme:
First of the visual composer does not work for my homepage.
When i click on the visual composer for my homepage it goes directly to a product page in the visual composer, however, i cant change anything in there. But the page i want to show in the visual composer is the homepage. Also when i change the css for only the homepage, and click publish. It does save the css i add for the homepage.
Any fix for this?
Hi there,
Which version of the theme are you using, the latest version is 2.5 and works fine with the Visual Composer, if you’re not using the latest version then update it to the latest version and if it still doesn’t seem to work then send us your login credentials via e-mail.
To send us email use this link and please write us your request again, because we receive a lot of emails on daily basis and we unfortunately can’t remember all customers requests.
P.S: Please note that we usually do not respond to emails that request support, because here is our primary support forum. We use contact form just for sending sensitive information. Also emails response time can be up to 7 business days.
Kind Regards,
Art
Hi,
the logo on mobile devices (smartphones) not less. For this reason, the Mobile Menu is hidden. Have a look at the screenshot. https://www.dropbox.com/s/8zxwaz2inu2vuyf/Zwischenablage01.jpg?dl=0Best regards, Eugen
The size (300px) on Desktop is ideal for me. Small I would not make it. Is there another solution to this? For example, one can upload option woman a different size for smartphones. Many themes have such options.
Check! But it has brought nothing. 
It works now. Many thanks!
hi, do Aurum come with social login?
hi,
i try to set up aurum as bookstore.
while using the bookshop demo files, i have not be able to arrange the head as it is shown in the demo – a simple full width layer slider, positioned right beyond the menubar.
i used the layer slider full width settings you have posted here before. but it changes nothing. no fullwidth and a big margin between layer slider and menu.
how can i change the position of the slider to fit right under the menu bar?
kind regards
Hi verlagderapfel
Layer slider in our homepage is set as first element of VC:
http://drops.laborator.co/11swvJust make sure you have set these settings for that slider:
http://drops.laborator.co/17K29these exactly my settings. despite these the element is neither positioned right beyond the menu bar nor is it display as a full width slider.
moved the site to a public server now > http://bit.ly/1LjinJd
i have been able to fix this by myself.
Hello – We like the theme a lot – thanks! 1] The BOOK Images on HOME and elsewhere are not scaled correctly nor showing the full BOOK Cover. How can I make this work? 2] Where do I add my PAYPAL email so when one purchases the system works? 3] Currently we do not use LinkedIn – how do I remove this from the TOP of the HOME page?
Many thanks from California! Charles
Hi Charles,
1. You are using different sizes for the books, if you want to use correct image sizes it is better to use the same dimension for all of them.
2. For this you should ask the WooCommerce team, they have built the ecommerce plugin and regarding payments and other modules it is better to ask them directly, we only style the themes and make them compatible for WooCommerce.
3. Go to Appearance > Menus and select the Social networks menu from the dropdown and remove the LinkedIn from the list.
Kind Regards,
Art