8686 comments found.
Is it possible to put an ID on a tab so I can link to it and have it open on loading of the page?
Hi elektro85! Yes, in the module there is the “History” option, here an example: https://undsgn.com/uncode/features/tabs-accordions/#analysis
Hi guys, love the theme. Just had a quick question in regards in ‘video format’ blog posts.
I’ve worked out how to get the video embed into the top of the blog post instead of the featured image thats fine. However I’m just querying the thumbnail for video post formats. Is there a way of having it display a play overlay for these formats of posts. So on the modules you can clearly see which posts are videos?
Hi CoppardDigital! We are sorry but we think we don’t fully understand you. Are you on this scenario? https://undsgn.com/uncode/how-to-be-in-the-flow-and-create-something-beautiful/
Otherwise can you please link your website and a few screenshots to understand what you refer (admin or frontend)?
Anyway, if you need private support is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
Hello Undsgn, how long it takes, after deleting the license from one website, to be used on another? I actually deleted the whole website, and still not able to use it else.
Hi NoirInk! Please send a private message using the form you find on this page, and include your Purchase Code so we can help! https://themeforest.net/user/undsgn
I also like to try different designs/ideas before putting anything in public. Most of the time I like to have demo version on a side. But deleting licenses ,, adding licenses .. feels a bit limited to me. Do you have any solution, other than buying 3k license just for testing?
Hi NoirInk! You just need to build your demo versions on the same domain.
ok, thanks 
You welcome!
Hello we can’t get two columns to show in the mobile when I click on the single category of the product page we created with the post function of your theme how can we solve this problem?
Hi sciarabba! It’s not properly clear what you need without a link to your page. Do you refer to the Posts module?
If you refer to the Posts module and you are using the Masonry layout you need to insert something like 100 in the latest breakpoint: https://undsgn.d.pr/Nyx7WG
If you are using he Posts module with the CSS Grid layout you can use this option: https://undsgn.d.pr/xTtLD8
Anyway, if you need support is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
Hi, in your documentation you recommended Groovy mega menu to extend the functionality of the mega menu. Isn’t that great…. Is there another better plugin that can work with Uncode? On your roadmap, have you the implementation of a dynamic megamenu manageable with images, tabs, ...? Thanks
Hi NextConceptMilan! Personally I have seen some amazing implementations of this plugin on Uncode, anyway if you don’t like its features you can evaluate QuadMenu, they also use Uncode for their promo site https://codecanyon.net/item/quadmenu-responsive-wordpress-mega-menu/21315450
Unfortunately, compared to other plugins, perhaps not compatible with uncode, it is a bit poor in functions. Anyway thank you very much, we are looking for a solution!
Thank you for the confirmation, even if we cannot help too much here!
Hi, I brought this theme for around 2 years and very happy to use it, now I need to create new subdomain purpose for update my main website which is already registered envato license, Do i need to purchase additional license? Or are there any suggest to bring main site into develop subdomain with same register license.
Hi pla6344! Is this subdomain on the same domain of the original website? In a few words, are they on the same server? If they are on the same server you should have no problems, otherwise it could be that you have exceeded the number of installations allowed. Anyway, if you have problems feel free to drop us a message using the form you find on this page: https://themeforest.net/user/undsgn
Hi, is it possible to disable the Lightbox on a specific page when using Media Gallery? I would like to have no link for the images on just this one page.
https://gapd.com/earlscourt/producer/Thanks, G.
Hi gapd! You just need to use this option: https://undsgn.d.pr/pqKDmu
Whoops, that was staring me right in the face, haha! Thanks for the help. G
Thank you for the confirmation!
My Uncode theme has stopped working since migrating to a new server. Is there a plugin or easier way to reconnect it? This happened with another website and downloading the them totally destroyed the website.
Hi dreamtimepr! Without more information and a link to your site it is really impossible to figure out what is not working. The only thing that comes to mind is that a proper migration to the new server was not done if it was working before and now you have this problem. For example this is a good plugin when migrate a website: https://it.wordpress.org/plugins/all-in-one-wp-migration/
Here’s a link to the website https://dreamtimecreative.com.au/
Hi dreamtimepr! Sorry but what is the problem? If you don’t explain it, it’s really hard to understand. Here if we click the link we see a normal site like many others and we don’t feel that anything is broken: https://undsgn.d.pr/OI7QUV
Please insert details about the problems you see.
Synergy fixed it by re-migrating the site. Thanks for checking.
Thank you for the confirmation!
Thank you for suggesting it was the migration, I sent your message to them and it was fixed.
You welcome!
Hi.
I want to set the header to “Post Media Type > Image Default” on the demo page.
url: https://undsgn.com/uncode/structures-and-design-of-nature-are-a-beautiful-things/Please tell me the setting method.
Thank you.
Hello! First, the post must be made without the use of WP Bakery, but with the regular text editor only, otherwise the featured image cannot be displayed. Second, in Page Options (or Theme Options if you want this option to apply to all posts) you need to set “Show Featured Image” to “Yes”: https://undsgn.d.pr/pCtXvW
Anyway, if you need support is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
Hi! I would please like to know if i can show slides or image galleries in a random order using one of the sliders available with uncode
Hello! Absolutely, the Media Gallery module has a “random” option and you can choose from various layouts, grids or carousels.
Anyway, if you need further support, it is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
P.S.: sorry, forgot to include the screenshot to clarify what I mean: https://undsgn.d.pr/hWk2BW
Thank you so much! I would need these images to be shown in full screen. Can you please tell me if it’s possible to do this with the media gallery module, or if the sliders (uncode, sliders revolution,…) module would be more suitable in this case?
What i wanted here, specifically, was that every time the site is opened a different image would be presented in this slideshow element. Is that possible?
Hello, to have a slide that perfectly fits the screen size you can’t use the Media Gallery carousel unfortunately. The Content Slider module accomplishes this task, but it does not have an option for random slide order unfortunately: https://support.undsgn.com/hc/en-us/articles/213456929-Content-Slider Or you have to use Slider Revolution and in that case I refer you to their documentation https://www.sliderrevolution.com/manual/
hi do you offer for website editing I Have the themes. Thanks
Hello! Could you clarify what you mean please? Are you interested in purchasing Uncode but need someone to edit it for you? Or do you want to achieve customizations not included in the demos? We do not offer this kind of services, but our support can help you with advice of course, plus we have in-depth documentation https://support.undsgn.com/hc/en-us and video tutorials https://www.youtube.com/channel/UCK27He6L4DmmC_5SCClFEkQ to help you to achieve the result you prefer using the available features. On the other hand, if you need to customize the theme by adding features that are not included I can only advise you to contact a freelancer.
Hello Uncode Team, once again, thanks so much for the great theme.
I have a question, I have a woocommerce store on our uncode website. Is it possible to show under the product posts a drop down button?
https://playlist-promotion.com/wp-content/uploads/2022/07/additional-information.pngBasically when you click on the button, it will open a new area with additional text information about the product. I want that the customers stay on the same page without clicking on the product. Thanks so much
Hi Tobias, I can show you how to attach code to the product, of course, i.e. where to display a button, but as far as the implementation of the button itself and further custom functionality I can’t help you, that goes beyond the scope of this support. So: first check that you have enabled WooCommerce hooks from Theme Options https://undsgn.d.pr/v6WdEG. Then you can attach your own function to print output to the woocommerce_after_shop_loop_item_title hook like this:
add_action( 'woocommerce_after_shop_loop_item_title', 'my_func', 11 );
function my_func(){
echo 'your_code';
}
Hope this will help you. Best
Bug on the Header using internal links
Hi, My agency has around 10 Uncode licenses, 5 under my user, and some additional ones used by a coworker, so we have been regular users of Uncode for the last few years.
I just noticed what looks like a bug in chrome. Being in a page, if you go to a section through an internal link (yoursite.com/page/#section1), when you scroll to the top again, the header disappears. This doesn’t happen on Firefox, I don´t know about other browsers, but it is a problem on Google Chrome. Any way to fix this bug?
Thanks in advance!
Hi pabl0uy! We are sorry but we are not able to replicate this setup. Please share a link of a page affected by this problem so we can understand, and if it’s confirmed a bug provide a possible fix.
Hi!, I’m sorry about the delayed response. We (a coworker) ask for this issue in the Uncode support and already was clarified. The internal links need to link to the section’s name instead of the section’s id.
Thanks a lot to your team!
Thank you too, all the best
Hi, When changing the layout for the product pages nothing happens. I have changed it under the Theme Options > Products. And I have changed it under the individual product settings as well. The layout just stays the same, irrespective.
Hi RidhaDawood! Are you sure you are testing it on a new layout? Note that you are looking at a page that was created with custom mode, it is possible that Page Options has the upper hand. In fact, in Page Options, values can be defined to override Theme Options or inherit these values, ex: https://undsgn.d.pr/TP2bPt
It seems strange that there is a bug because everything works for us and no other user has ever reported something similar. In case share some links of your installation so we try to understand if possible from outside.
Hello ! I have purchased the uncode theme for the own.pt website . I am only posting this comment to prove that I bought the theme and grims is trying to solve the firefox problem with you guys. Thank you ! All the best, miguelsoeiro
Hi miguelsoeiro, and thank you for this message! We are already trying to help him but it is not always possible without access to the installation. This is something you need to understand.
Hi, I’ve set up a page that has a Media Gallery set to Grid layout and Masonry for Layout Mode. I have Filtering turned on. The pages loads within 5 seconds, but if I then click on one of the filters it will take just over 1 minute to load. Is there something with Filtering that would cause such a delay?
https://gapd.com/earlscourt/design/Thanks, G.
Hi gapd! Unfortunately, it’s not easy to be able to figure out what’s going on because it completely crashes the page and there are no visible errors.
The setup is even not different from a large gallery like this (even if you have the Child Theme with possibile modifications, etc): https://undsgn.com/uncode/showcase/
The only suggestion we have from here is to try to switch to the new CSS Grid mode, you can have the same exact layout: https://support.undsgn.com/hc/en-us/articles/4550006866449
Hi thanks. That seems to fix the loading issues. However, the Masonry effect does’t seem to work the same. The images are not resizing to fill in gaps and instead leaving blocks of empty space above or below images.
Hi gapd! You need to set the Ratio option to 1:1, ex: https://undsgn.d.pr/VFsR1h
Hi, when I set the Ratio to 1:1 then each image appears full width of the browser.
Hi! Sorry but it’s not this the correct layout? https://undsgn.d.pr/SWNMq8
Hi, thanks for checking that. At first it was showing each image full width of the browser, but now it appears like your screen shot.
However, it is cropping all the images so that the are all square. How do I get it back to maintaining correct ratio of each image? Most are sure, but some are horizontal rectangle, and others vertical rectangle.
Hi, thanks for checking that. It now looks like the screen shot you’ve sent. At first it was showing each image the full width of the browser.
Problem now is that at 1:1 Ratio each image is cropped to a square. How do I get it back to maintaining the correct ratio for each image. While most are square, some are horizontal rectangles and some are vertical rectangles.
Hi gapd! We are sorry, we didn’t notice that you were using Masonry for this reason, it seemed to me that all your images were 1:1. So you necessarily have to use Masonry. Try putting Masonry back in and passing us the page shortcode let’s try and see if we can replicate it on our installation.
You bet, thanks! Let me know if this is what you need.
And just so you know, I’m using the Child theme that came with the instal, but I have not altered it. As for plugins, I’ve only added one, Comet Cache, but even if I disable it the problem persists. Thanks, G.
column_width_percent="100" gutter_size="3" overlay_alpha="50" shift_x="0" shift_y="0" shift_y_down="0" z_index="0" medium_width="0" mobile_width="0" zoom_width="0" zoom_height="0" width="1/1" uncode_shortcode_id="210787"]vc_gallery el_id="gallery-43823" random="yes" medias="111228,111227,111226,111225,111224,111223,111222,111221,111220,111219,111218,111217,111216,111215,111214,111213,111212,111211,111210,111209,111208,111207,111206,111205,111204,111203,111202,111201,111200,111199,111198,111197,111196,111195,111194,111193,111192,111191,111190,111189,111188,111187,111186,111185,111184,111183,111182,111181,111180,111179,111178,111177,111176,111175,111174,111173,111172,111171,111170,111169,111168,111167,111166,111165,111164,111163,111162,111161,111160,111159,111158,111157,111156,111155,111154,111153,111152,111151,111150,111149,111148,111147,111146,111145,111144,111143,111142,111141,111140,111139,111138,111137,111136,111135,111134,111133,111132,111131,111130,111129,111128,111127,111126,111125,111124,111123,111122,111121,111120,111119,111118,111117,111116,111115,111114,111113,111112,111111,111110,111109,111108,111107,111231,111230,111250,111249,111248,111247,111246,111245,111244" filtering="yes" filter_mobile_dropdown="yes" filter_scroll="yes" gutter_size="0" media_items="media|lightbox|original,icon,title" screen_lg="1000" screen_md="600" screen_sm="480" single_overlay_opacity="50" single_text_anim_type="btt" single_h_align="center" single_padding="2" single_icon="fa fa-plus2" single_border="yes" single_css_animation="bottom-t-top" single_animation_delay="100" lbox_title="yes" lbox_caption="yes" lbox_social="yes" lbox_deep="yes" lbox_no_tmb="yes" carousel_rtl="" single_title_uppercase="" single_title_serif="" single_no_background="" items="e30=" uncode_shortcode_id="231355"[/vc_row]Hi gapd! I pass the point to the developers and get back to you as soon as I can.
Appreciate it, thanks! G.
You welcome!
Hi gapd! Please find the possible fix here at the top of the page: https://support.undsgn.com/hc/en-us/articles/214092169
Fantastic, that did the trick! Thanks. G.
Hi gapd, and thank you for the confirmation! 
Hello again, I would like to change the CSS styles of the menu buttons. Is this possible?
I would like to have CSS control to change the background color of the menu buttons, line color, text color, and also be able to define the colors for the hover style of those buttons.
Could you help me? Thank you very much for your support.
Hi tabarestabares! You can use the normal classes applied to your buttons, please follow this documentation at the “Buttons Style” part: https://support.undsgn.com/hc/en-us/articles/213457169
Anyway, if you need support is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
Great! Thanks!
Thank you for the confirmation!
Hello, I am writing to you to help me with CSS code.
1.- I need to eliminate the inner shadow of the «body frame» [ Layout ]
2.- I would also like to remove the shadow from the main menu when we scroll.
Thank you very much for your support.
Hi tabarestabares!
1. Here you are:
.body-borders .body-border-shadow {
box-shadow: none;
}2. It should be this one but not possible to verify without checking your specific settings: @media (min-width: 960px){
body:not(.menu-force-opacity):not(.menu-scroll-transparency:not(.navbar-hover))[class*=hmenu-] .menu-primary.is_stuck .menu-container {
box-shadow: none;
}
}
Great! Thanks so much!
Thank you for confiriming!
Hi uncode team! Quick question – am i able to import a font family that’s not from Google/adobe/squirrel font? I’ve got the woff files so let me know if that’s possible. If yes, do you have the instructions for it?
Thanks!
Hi werkwerk! Please follow: https://support.undsgn.com/hc/en-us/articles/214006085
Thanks!! Another question! I’ve added a custom line height, but how do i specify a particular text to have that particular line height?
I figured this out, so no worries, thanks!
Hi werkwerk! sorry for the delay, and thank you for the confirmation!
Hello there! A client of mine uses your theme on their website and we found issues presenting the store page in the Firefox browser (in other browsers everything is fine). I also note on your changelogs that problems in Firefox are frequent and I belive that is something related to this:
“Slides Scroll wrong height of the content container on Firefox”
I found this on the 2.0.0 version of your changelog and I think that the actual problem is maybe something related to that.
If you want to see our example, you can check the following link:
https://own.pt/shop-creative/In there you can note the diference between seeing the page in Firefox versus other browsers.
Thank you very much for your atenttion.
Hi Grims! It seems that something is broking your layout (moreover we see that you have custom codes): https://undsgn.d.pr/dhSOsG
The issue you refer is not present on our demo: https://undsgn.com/uncode/homepages/shop-creative/
Anyway, if you need support is offered in our Help Center, there we have a completely dedicated support team, please submit a ticket so we can check your installation and support the solution privately! Thank you! https://support.undsgn.com/hc
Well, I have tried that and although I have the license code, a message appeared indicating that the support period expired. I thought that this might be an issue that you could be aware of, maybe because of recent updates of the Firefox browser or Wordpress.
We are essencially only using the Posts component block of Bakery Page Builder along the page. We only have used your layout demo of the shop-creative page as a starting point (replicating lines of Post components after the initial products).
Hi Grims! Support Expiration is not something we invented for Uncode but one of the basic Policies of all ThemeForest marketplace. Moreover, only the user with the “Purchased” badge is eligible for support under the terms stated. Unfortunately, there are also versions of the famous themes distributed with nulled Purchase Codes. We are sorry but as an author, also have to abide by the terms of the contract with Envato (ThemeForest) which is in the marketplace’s own interests.
Anyway, also with a Posts module the problem is not present in a default installation, please try to remove all extra plugins and customisations, and in case ask your client to contact us: https://undsgn.d.pr/qTJve1
I dont have the password of my client Themeforest account, but I have signed with the Username (given by the client) and the license code on you support page. The username must be correct and related with the license, or else your support page dont accept the sign in. It’s true that the support period expired, but neither my client or I want that Undsgn/Themeforest even thinks that we don’t have a valid licence.
I’m using this comments page with my own Themeforest account as an alternative for not being able to use the support page.
Nevertheless, I recognise that you are trying to help and I will try your sugestions.
Hi Grims! Yes no one is saying you are not a loyal customer, I am just reporting what are the ways in which we have to deal with these things.
Ok let us know how it goes, or in case contact us when you have removed all extra plugins, and custom codes we see (so it’s easy for us to understand id there is an edge case).
Hey again!
I’ve done your suggestion and deactivated all possible plugins. In this case, the result was still the same and then I deactivated the childtheme, using directly the default Uncode theme.
After the deactivation of the childtheme, the result was the essentially the same (with the following rows of content not showing up), but at least the first row of contents was top aligned.
I tried using simple text blocks and the result was the same. I took screenshots of the the same page with firefox vs other browsers:
Other Browsers https://drive.google.com/file/d/17axH-sX20H5L_ycA0lzB6VZPBRgRuVZP/view Firefox https://drive.google.com/file/d/1Ex6LAcqxrbGeUg1EvKTy9vRKwABr59Ui/viewI don’t know the reason behind this issue with Firefox, but any feedback would be useful and very appreciated.
Hi Grims! Is all this content inside the Header or only the first Row?
Anyway, couldn’t you ask your client to contact us even if his support has expired here? So at least we’ll have the “Purchased” badge?
Hello again undsgn.
Thanks for your efforts on this situation. I asked my client to post the comment.
All the content it’s on the original row element and we duplicated the blocks. To be more easy to understand, I’ve took a screenshot of the Page Builder:
https://drive.google.com/file/d/1csHl3iCr7SlvQuRnphSAYhKvMJRixQey/view?usp=sharingHi Grims! What happens if you move the second and third Inner-Rows in a new first level Row? Can you please test?
Hello there!
In another element, the rows work fine. How strange for inner rows not displaying properly in Firefox. I think it’s solved then!
Thank you very much for your attention!
Hi Grims and thank you for the confirmation!
